Digi-Code for Stanley Garage Door Opener Compatible Wireless Keyless Entry DC5202

DC5202

$42.95

• Compatible with all STANLEY 10 dip switch (310MHz) garage door openers and gate operators ONLY.
• NOT  compatible with Stanley SecureCode.
• Flip lid - lighted key pad.
• Battery, coding instructions and screws for mounting included.
• If you have a Stanley SecureCode garage door opener or gate operator you may use either the 65LM Keyless by LiftMaster or the KEP-1 Keyless by Genie. Both are found below.

CLICK HERE FOR CODING INSTRUCTIONS

Wireless Keyless Entry System for Stanley Garage Door Openers

49442 Keyless is Obsolete

387LM

and Discontinued

$29.95

• The New Liftmaster (Almost) Universal Wireless Keyless Entry (387LM) is compatible with SecureCode and 10 position switch (310MHz) Stanley garage door opener formats.
• Open/close your garage door without a remote or key.
• Will operate one garage door opener.
• Slide-up weatherproof cover.
• Bright illumination backlighting.
• Completely wireless for easy installation.
• Easy to program.
• 9-volt battery, coding instructions, and mounting screws are included.

CLICK HERE FOR 49442 CODING INSTRUCTIONS

CLICK HERE FOR 387LM CODING INSTRUCTIONS

Stanley Garage Door Opener Four-Function Wall Console 49487

49487

$24.00

• Works on any Stanley garage door opener manufactured after January 1993 and Canadian models January 1994.
• Control your garage door opener, vacation lock, and safety light from one convenient location.

19614R Garage Door Opener Universal Wall Button

19614R

$8.95

• Universal Unlighted Wall Button works with any door opener.
• Mounts to inside wall.

WIRE 2 Conductor

WIRE

$9.95

• 95' spool, 2 conductor wire for damaged wire repair.
• For use with wall buttons or safety sensors.

LiftMaster Chamberlain Garage Door Opener Hard-Wired Keyless Entry System 65LM

65LM

$44.95

NO LONGER AVAILABLE

• This keyless entry system consists of a keyboard and a console. The keyboard sends a coded signal from outside the garage. The console fastens to an inside garage wall. It receives the 4-digit programmed coded signal and starts the door opener.

• 10,000 possible combinations. Code can be changed easily if desired.

• The user has 10 seconds from the time the first number is pressed to enter the 4-digit code.

• If incorrect numbers are accidentally pressed, a 5 second interval is necessary before starting over.

• Operates from the garage door opener power with a battery back-up for code memory and lighted keyboard. Unit will not operate without battery.

• Simple to install in 5 easy steps.

• Provides an additional push button control to operate door from inside garage.

• The garage door can be operated after a valid code entry by pressing ANY single key AS LONG AS THE KEYBOARD LIGHT REMAINS ON.

• Keyboard illuminates and remains lit for 10 seconds when ANY number is pressed. In darkness this feature allows user to press ANY number before entering the 4-digit code. 

• IMPORTANT: Some garage door openers have a third screw terminal which supplies power to the radio control. This terminal can be connected to terminal No. 3 on the console with a third strand of bell wire (not supplied).

• With ANY garage door opener made by Stanley, accessory Transformer 95LM (which is found below)  must be installed.

• Lighted Keyboard and Flip-Up cover.
• Battery, Wire, Mounting Clips and Instructions included.

***IMPORTANT:  There are certain compatibility discrepancies that the manufacturer claims with this keyless entry. With that in mind, we strongly suggest that you purchase and use the 95LM Transformer found below.

LiftMaster Plug-In AC 24-Volt Transformer Power Supply 95LM

• Accessory for the 65LM hard wired keyless.
• If your garage door opener has only 2 terminal connectors and no external 24-volt power supply, then this transformer is needed.
• For use with all types of add-on wire-in gate and garage door opener receivers.
• Plugs into standard 120-volt outlet.

Genie Garage Door Opener Universal Keyless Entry KEP-1

KEP-1

$39.95

• For use with Genie, Genie Intellicode, Sears, Chamberlain, Stanley and most other brand garage door openers.
• Offers secure garage entry without using a remote control or key.
• Code Pad, Signal Tail, Control Box, Wall Transformer, 2 rolls of wire, insulated staples fasteners, and complete Instructions are included.

Garage Door Opener Do-Kit

DO-KIT

$19.95

• Used in "Vault" type situations when garage does not have service entry door.

Garage Door Opener Keylock

K-1

$12.95

• Allows access to garage using key.
• 2 keys included.