41A4885-5 LiftMaster Garage Door Opener Belt Drive Gear & Sprocket Assembly

• Replacement Gear and Sprocket assembly  compatible with Belt Drive LiftMaster Chamberlain 2001 thru current
• Compatible with LiftMaster Chamberlain belt drive garage door opener models 2280, 2580, 2585, WD822K, WD922K, WD912KS, WD822KS, WD912KS all models may not be listed.
• Includes spring washer, thrust washer, retaining ring, bearing plate, roll pins (2), drive gear and worm gear, helical gear w/retainer and grease.
• 41A4885-5 ONLY FOR GARAGE DOOR OPENERS 2001 to CURRENT.
• Repair gear sets for openers made before 1984 are no longer available.

CLICK HERE FOR RECOMMENDED LUBRICANT

41A4885-2 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Belt Drive Gear & Sprocket Assembly

• Replacement Gear and Sprocket assembly  compatible with Belt Drive Chamberlain LiftMaster  door openers 1993-2001.
• Compatible with LiftMaster Chamberlain belt drive garage door opener models 1270, 1280, 1280R, 8100, 8200, 9200 all models may not be listed.
• Includes all necessary washers, clips, fasteners and instructions.
• 41A4885-2 ONLY FOR GARAGE DOOR OPENERS 1993-2001.
• Repair gear sets for openers made before 1984 are no longer available.

CLICK HERE FOR RECOMMENDED LUBRICANT

41A2817 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Worm & Drive Gear Assembly

• Compatible with Chain Drive LiftMaster, Chamberlain Brand, LiftMaster Professional, Access Master and Sears Craftsman garage door openers 1984 thru current.

• LiftMaster Chamberlain belt drive garage door opener models 1270, 1280, 1280R, 2280, 2580, 2585, 8100, 8100M, 8200, 9200, WD822K, WD922K, WD912KS, WD822KS all models may not be listed

• Includes all fasteners as pictured and installation instructions.
• Repair gear sets for openers made before 1984 are no longer available.

CLICK HERE FOR RECOMMENDED LUBRICANT

41A2818 LiftMaster Chamberlain Sears Craftsman Garage Door Openers Limit Switch Drive Gear and Retainer Kit

• For use with LiftMaster, Chamberlain brands and comparable Sears/Craftsman Models 1984 thru current.

• LiftMaster Chamberlain belt drive garage door opener models 1270, 1280, 1280R, 2280, 2580, 2585, 8100, 8100M, 8200, 9200, WD822K, WD922K, WD912KS, WD822KS all models may not be listed

• Excluding LiftMaster Models 2595, ATS211X.
• Kit includes limit switch gear, retainer and lubricant.

41A2826 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Shaft Bearing Kit

• LiftMaster Chamberlain belt drive garage door opener models 1270, 1280, 1280R, 2280, 2585, 8100, 8100M, 8200, 9200, WD822K, WD922K, WD912KS, WD822KS all models may not be listed.

41A4371 LiftMaster Chamberlain Sears Craftsman Belt Drive Garage Door Opener Sprocket Cover

• Compatible with LiftMaster Chamberlain garage door opener belt drive  models 1270, 1280, 1280R, 2280, 2580, 2585, 8100, 8200, 9200, WD822K, WD922K, WD912K, WD822KS, WD912KS (all models may not be listed).
• NOT compatible with dual sprocket units.

41C0076 LiftMaster Chamberlain Sears Craftsman Belt Drive Garage Door Opener Belt Cap Retainer and Cog

• Compatible with LiftMaster Chamberlain garage door opener belt drive models 2500B, 2500D, WD952KD, WD952KLD, HD800D. All models may not be listed.

41D3452 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Limit Switch Assembly

• Compatible with belt drive garage door openers from 1986 to current made by LiftMaster, Chamberlain, Sears Craftsman, Wayne-Dalton, Master Mechanic and Chamberlain Brand door openers.

• Garage door opener belt drive models 1270, 1280, 1280R, 2280, 2580, 2585, 8100, 8100M, 8200, 9200, WD822K, WD922K, WD912KS, WD822KS all models may not be listed

• Not for opener models 2575, 2595, PD752, PD758S
• LiftMaster Chamberlain limit switch assembly 41D2731 for garage door openers 1984-1986 no longer available.

41B2861 LiftMaster Garage Door Opener RPM Sensor

• Compatible with LiftMaster and Chamberlain Brand openers 1984 thru 1986

41C4398A LiftMaster Garage Door Opener RPM Sensor

• Compatible with LiftMaster, Chamberlain Brand, Sears Craftsman automatic garage door openers 1986 thru current.
• Compatible with LiftMaster Chamberlain garage door opener chain drive  models 1040, 1045, 1046, 1050, 1055, 1056, 1060, 100WD, 200WD, 300 WD, 1140, 1145, 1146, 1150, 1155, 1156, 1160, 110WD, 210WD, 310WD, 1240, 1245, 1246, 1250, 1255, 1256, 1260, 1260LK, 1245LK, 215WD, 220ED, 315WD, 320WD, 1240R, 1245R, 1246R, 1255R, 1256R, 1265, 985, 2265, 2565, 2245, 2255, 2575, 2595, 140, 150, 240, 350, 450, 550, 700WHC, 701WHC, 1000, 2000, 4000, 4001, 5000, 710WHC, 711WHC, 1100, 2100, 4100, 5100, 7200, 1200, 2200, 4200, 6200, 7220, CG40, PD210, PD610, PD612K, 7420, PD752, PD758S (all models may not be listed).

30B363 LiftMaster Garage Door Opener Capacitor

• Capacitor for 1/2 H.P. LiftMaster and Chamberlain Brand garage door openers 1984 thru current.
• Match to your capacitor part number

30B387 LiftMaster Garage Door Opener Capacitor 1/3 HP

• Capacitor for 1/3 H.P. Sear Craftsman, LiftMaster and Chamberlain Brand garage door openers 1984 thru current.
• Match to your capacitor number.

30B366 LiftMaster Garage Door Openers Capacitor

• Capacitor for 1/4 H.P. LiftMaster and Chamberlain Brand garage door openers 1984 thru current.
• Match to your capacitor number.

LiftMaster Garage Door Opener Receiver Logic Board

41A1344 LiftMaster Garage Door Opener Light Bulb Socket

• Light bulb socket  for LiftMaster, Chamberlain Brand, Garage Master, and Sears door openers 1984 thru current.
• LiftMaster Chamberlain garage door opener chain drive models:1040, 1045, 1046, 1050, 1055, 1056, 1060, 100WD, 200WD, 300 WD, 1140, 1145, 1146, 1150, 1155, 1156, 1160, 110WD, 210WD, 310WD, 1240, 1245, 1246, 1250, 1255, 1256, 1260, 1260LK, 1245LK, 215WD, 220ED, 315WD, 320WD, 1240R, 1245R, 1246R, 1255R, 1256R, 1265, 985, 2265, 2565, 2245, 2255, 2575, 2595, 140, 150, 240, 350, 450, 550, 700WHC, 701WHC, 1000, 2000, 4000, 4001, 5000, 710WHC, 711WHC, 1100, 2100, 4100, 5100, 7200, 1200, 2200, 4200, 6200, 7220, CG40, PD210, PD610, PD612K, 7420, PD752, PD758S all models may not be listed.

108D34 LiftMaster Garage Door Opener Lens Cover

• LiftMaster and Chamberlain Brand garage door opener lens for two light chain drive and belt drive door operators
• Chamberlain LiftMaster door opener chain drive models 1050, 1150, 1250, 1265, 1060, 1160, 1260, 320WD, 300WD, 1260LK, 220WD, 350, 550, 5000, 5100, 6200, 7200, 7220, PD600 all models may not be listed.

GLB-4 Garage Door Opener Heavy Duty Light Bulbs

• Heavy Duty 60 watt bulbs.
• Vibration resistant. 2 per pack.

41A4373A LiftMaster Garage Door Opener Safety Sensor Kit

• Compatible with LiftMaster and Chamberlain Brand  chain drive openers 1993 thru 1997.
• Includes sensors only - no brackets.  Use 41A6569 brackets below.
• Each sensor has a green led light and a bolt hole that runs right through the center of it.
• Each sensor shown includes approximately 18" of wire attached.  Designed to splice into your existing wires.  Wire connectors included.
• "Recommended Surge Protection when replacing safety sensors or circuit boards".

41A6569 LiftMaster Chamberlain Sears Craftsman Safety Sensor Brackets

• For 41A4373A safety sensors - shown above.
• Includes 1 pair of brackets and fasteners.

41A5034 LiftMaster Garage Door Opener Safety Sensors

• Compatible with LiftMaster and Chamberlain Brand chain drive openers 1997 thru current.
• Includes sensors only - no brackets.  Use 41A5266-1 brackets below.
• Each sensor shown has approximately 18" of wire attached.  Designed to splice into your existing wires.  Wire connectors included.
• Will NOT fit brackets that the 41A4373A Sensors use.
• "Recommended Surge Protection when replacing safety sensors or circuit boards".

41A5266-1 LiftMaster Garage Door Opener Safety Sensor Brackets for Snappy Sensors

• Compatible with LiftMaster and Chamberlain Brand  Security+ garage door openers 1997 thru current.
• For use with 41A5034 Style Sensors ONLY.

41A5281 Liftmaster Chamberlain Sears Craftsman Garage Door Opener Extension Brackets for 41A5266-1 Brackets

• Allows for flexibility in installation of 41A5266-1 brackets above.

41B873 LiftMaster Garage Door Opener Safety Sensor Sun Shields

• LiftMaster, Chamberlain, Sears Craftsman, and Chamberlain brand garage door opener safety sensor sun shields.
• These safety sensor sun shields are used to prevent sunlight from shining into sensor causing accidental reversal of garage door.
• ONLY compatible with 41A5266-1 safety sensor brackets pictured above.
• Includes one pair.

CPS-U LiftMaster Commercial Door Operator Protector System

• For use with models CPS, CPSll, CPS-L and CPS-U.
• Direct connect commercial protector system for Logic Control.
• Provides protection for doors up to 30ft. wide.
• For use with the Logic Control Board Version 2 only.
• If using multiple sets of photo eyes on one Logic operator, use CPS-U for lowest position and CPS for every other position.
• For use on LiftMaster commercial door operators only.
• Includes emitter, receiver, mounting brackets, "C" wrap, wire, necessary hardware, and installation manual.

CPS LiftMaster Commercial Door Operator Protector System

• Commercial Protector System provides protection on doors up to 30 feet wide.
• For use on LiftMaster commercial door operators only.
• Provides protection for doors up to 30ft. wide.
• Includes emitter, receiver, mounting brackets, "C" wrap, wire, fasteners and installation instructions.

41K4629 LiftMaster Protector System Interface Box

• Replacement Interface Box.
• Used with CPS Protector Systems.
• Included with CPS Protector System - shown above.
• For use on LiftMaster and Link commercial door operators only.

41A6569 LiftMaster Chamberlain Sears Craftsman Safety Sensor Brackets

• For CPS and CPS-U sensors - shown above.
• Includes 1 pair of brackets and fasteners.
• Will also work with

WIRE 2 Conductor

• 95' spool, 2 conductor wire for damaged wire repair.
• For use with wall buttons or safety sensors.

41B4115 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Pigtail Connectors

41B3869-3 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Complete Trolley Assembly

• Compatible with LiftMaster and Chamberlain Brand  garage door openers 1984 thru current.
• Compatible with LiftMaster Chamberlain belt drive garage door opener models 1270, 1280, 1280R, 2280, 2580, 2500, 2500B, 2500D, 2585, 8100, 8100M, 8200, 9200, WD822K, WD922K, WD912K, WD912KS, WD822KS (all models may not be listed).
• If square rail assembly see part number 41C5141-1.
• Older part number 41B3869-1.
• Recommended lubricant 83A11-02

41C5141-1 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Square Rail Trolley Assembly

• Complete Trolley Assembly for square rail assemblies on Sears and Chamberlain brand garage door openers.
• Includes inner slide and outer trolley assembly.
• Recommended lubricant 83A11-02

144C54 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Belt Drive Pulley

• Belt drive pulley compatible with square rail assemblies.

 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Master Link

• Master link for LiftMaster and Chamberlain Brand garage door openers.
• Compatible with LiftMaster garage door opener Estate Series chain drive models 2565, 2575, 3575, 2595, 3595 (all models may not be listed).

• Compatible with LiftMaster garage door opener Estate Series belt drive models 2580, 2585, 3585, 2500, 3500, 2500B, 2500D (all models may not be listed).

• Includes one master link assembly.

• Older part numbers 41A1008, 4A1008.

41B5424 LiftMaster Chamberlain Sears Craftsman Garage Door Openers Belt Drive Pulley Bracket 

• For use on LiftMaster Belt Drive Models 2500, 2580, 3280, 3500D and 2280.
• For use on Chamberlain Belt Drive Models WD822K, WD912K and WD922K.

41A3588-1 LiftMaster Chamberlain Sears Craftsman Garage Door Openers Belt Drive Pulley Bracket 

• For use on LiftMaster belt drive models 1270, 1280, 1280R.

12D598-1 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Belt Drive U-Bracket

• For use on Chamberlain Brand and Sears Craftsman belt drive garage door openers that use the square rail assembly.

41A3589-3 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Belt Assembly

• Full belt assembly.
• For use with LiftMaster belt drive models 1270, 1280, 1280R.
• For use with Chamberlain belt drive models 8100, 8200, and 9200.
• Replaces Sears Craftsman part number 41A3589-12.
• For standard 7 foot high garage doors.
• "T" rail assemblies ONLY.
• Belt length end to end 232".

41A3589-1 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Full Belt Assembly

• Full belt assembly.
• For use with LiftMaster belt drive models 1270, 1280, 1280R.
• For use with Chamberlain belt drive models 8100, 8200, and 9200.
• For standard 8 foot high garage doors.
• "T" rail assemblies ONLY.
• Belt length end to end 256".

41A3589-2 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Full Belt Assembly

• Full belt assembly.
• For use with LiftMaster belt drive models 1270, 1280, 1280R.
• For use with Chamberlain belt drive models 8100, 8200, and 9200.
• For standard 10 foot high garage doors.
• "T" rail assemblies ONLY.
• Belt length end to end 304".

41A5434-11 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Belt Assembly

• Full belt assembly.
• For use with LiftMaster belt drive models 2500, 2580, 2280, 3500, 3580, 3280.
• For use with Chamberlain belt drive models WD822K, WD922K, WD912K.
• For standard 7 foot high garage doors.
• "T" rail assemblies ONLY.
• Belt length end to end 233 1/2".

41A5434-13 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Full Belt Assembly

• Full belt assembly.
• For use with LiftMaster belt drive models 2500, 2580, 2280, 3500, 3580, 3280.
• For use with Chamberlain belt drive models WD822K, WD922K, WD912K.
• For standard 8 foot high garage doors.
• "T" rail assemblies ONLY.
• Belt length end to end 255".

41A5434-14 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Full Belt Assembly

• Full belt assembly.
• For use with LiftMaster belt drive models 2500, 2580, 2280, 3500, 3580, 3280.
• For use with Chamberlain belt drive models WD822K, WD922K, WD912K.
• For standard 10 foot high garage doors.
• "T" rail assemblies ONLY.

41A5250 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Belt Assembly

• Full belt assembly.
• For use with Chamberlain belt drive models WD912KS, WD822KS, WD822KD, WD952KD, WD952KLD, HD600.
• For standard 7 foot high garage doors.
• "Square" rail assemblies ONLY.
• Belt length end to end 237 1/2".

41A5250-1 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Full Belt Assembly

• Full belt assembly.
• For use with Chamberlain belt drive models WD912KS, WD822KS, WD822KD, WD952KD, WD952KLD, HD600.
• For standard 8 foot high garage doors.
• "Square" rail assemblies ONLY.
• Belt length end to end 260 1/2".

41A5250-2 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Full Belt Assembly

• Full belt assembly.
• For use with Chamberlain belt drive models WD912KS, WD822KS, WD822KD, WD952KD, WD952KLD, HD600.
• For standard 10 foot high garage doors.
• "Square" rail assemblies ONLY.

41B4103 LiftMaster Chamberlain Sears Craftsman Tensioner Assembly

• Tensioner Assembly for all Belt Drive Models.

109B33 LiftMaster Chamberlain Sears Craftsman Belt Clip

• Belt Clip for all Belt Drive Models.

178B35 LiftMaster Chamberlain Sears Craftsman Garage Door Opener Curved Door Arm Section

• Curved door arm section for LiftMaster and Chamberlain Brand  garage door openers.

178B34 Lift-Master Garage Door Opener Straight Door Arm Section

• Straight door arm section for LiftMaster and Chamberlain Brand  garage door openers.

41A5047 Lift-Master Garage Door Opener Door Bracket

• Replacement door bracket for all LiftMaster, Sears, and Chamberlain brand garage door openers.
• Includes clevis pin & lock ring.

41A4353 Lift-Master Garage Door Opener Header Bracket

• Replacement header bracket for LiftMaster, Sears, and Chamberlain brand garage door openers made from 1990 to current.
• Includes clevis pin & lock ring.

 Garage Door Opener Lubricant

• Yearly application, prolongs the life of the worm and drive gears in chain drive openers.
• Also provides smooth and quiet operation on screw drive openers.
• 1-3/4oz. tube.

 Garage Door Lubricant

• Ideal for all metal moving parts on garage doors.
• Rated for once a year application. 8oz. can.

 Garage Door and Opener Lubricant Maintenance Pack

• Door and opener maintenance pack.
• Includes both screw drive and door lubricant.
• Rated for once a year application. 8oz.

Garage Butler Automatic Garage Door Closer

GarageButler

$59.95

Garage Door Butler complete details click here

• The Garage Butler is a device that will automatically close your garage door when you forget. You can NOW have peace of mind knowing that you NEVER have to worry about leaving it open ever again.

Great items to have on hand while working on your garage door opener, car or outside for any kind of chores.  Keep on hand and be prepared for any emergencies.